PCB UNLOADER LINK-PL250

The PCB UNLOADER LINK-PL250 was produced by SMTlink to unload PCBs. The real purpose of this is that when the arriving PCB is picked up by the conveyor that is attached and is then pushed into the magazine by a pusher that was specially created for the purpose. The magazine has been indexed to the subsequent position and is prepared for the upcoming cycle of unloading; this procedure will make your job easier.

Also, the PCB UNLOADER LINK-PL250 has a single-phase gear reducer motor that provides lift power, and the conveyor track is constructed of a unique profile with anti-collision stainless steel. Siemens PLC is used to operate a light touch button switch for control. To prevent the PCB from being fully pushed out and lifting the splint, the outlet is fitted with an anti-ply plate sensor.

If you’re unsure, browse our website and contact us for more details to learn why you ought to select SMTlink as your machine’s supplier.

SPECIFICATION:

• Model Name: PCB UNLOADER LINK-PL250
• 1920 x 823 x 1720 mm dimension
• Width of PCB (50mm x 250mm)
• length 650MM of PCB
• Power source: One AC220V, 60Hz
• Assurance 5Kgf/cm

Features:

It has a single-phase gear reducer motor is used to power the lift.

It uses a 30MM hard shaft guide rail.

Special stainless steel anti-collision profile is used to make the conveyor track.

The belting on the conveyor is composed of PC40 black rubber.

A light touch button switch operates the Siemens PLC that controls the system.

Use a tri-color bulb with a buzzer to indicate the state of the device.

A sensor from OMRON detects optical inductors.

To prevent the PCB from being fully pushed out and lifting the splint, the outlet is fitted with an anti-ply plate sensor.

To push the PCB to the rack, a pusher cylinder is used.

Electrostatic spraying was used for the entire equipment casing, resulting in a surface that is sturdy.